How to get a log file from the router or switch on MiR robots
This guide describes how to get a log file from the router or switch on MiR robots. The log file can be obtained either via a web interface or via WinBox. The WinBox utility allows for administration and configuration of MikroTik routers via your computer's operating system. WinBox can be downloaded from the MikroTik website.
Things you'll need
Your robot's router or switch must be configured with mir_1.2.0.rsc or newer—see How to set up the router or Ethernet switch on MiR robots on the Support Portal.
Getting the log via the web interface
Open a new browser window.
Go to the address http://192.168.12.1. This will take you to the web interface of the router or switch.
Log in with the default credentials:
Login: root
Password: mirex
Select WebFig in the upper-right corner of the interface.
Select Files from the list on the left side of the interface.
Select Download next to the desired log file.
Getting the log via WinBox
Open WinBox.
Enter the IP address 192.168.12.1 in the Connect To-box.
Connect to the router or switch using the default credentials:
Login: root
Password: mirex
Select Files from the list on the left side of the interface.
Right-click on the desired log file to open the context menu.
Select Download.
How to set up the router or Ethernet switch on MiR robots
Related Articles
How to set up the router or Ethernet switch on MiR robots
This guide describes how to set up the router or Ethernet switch to work correctly with MiR robots. MiR600 and MiR1350 and hardware version 7.0 of MiR100 and MiR200 has an Ethernet switch and not a router. This guide describes how to set up the ...Request help from Mobile Industrial Robots
Request help from Mobile Industrial Robots Technical Support Before creating a technical support ticket Check MiR Support Portal for documentation, and check MiR Academy [mir.docebosaas.com] for relevant online courses. Where should I create my ...How to use Modbus with MiR robots
Date: 2021-05-13 Document version: 1.3 Valid for: All MiR robots Valid for software version: N/A Valid for hardware version: N/A Modbus is a software communication tool that is used to communicate between MiR robots and other devices. You can enable ...How to replace the router with a Giteki certified router on MiR250
Date: 2022-05-20 Document version: 1.3 Document number: 300067 Order number: 450505 Valid for: MiR250 robots in Japan Valid for software version: N/A Valid for hardware version: N/A This guide describes how to replace the router with a Giteki ...MiR Hardware Version Overview - 1.0
Siehe Anhang